GMiner v2.09 (AMD/Nvidia GPU Equihash miner) Download and Configure

GitHub: DOWNLOAD GMiner v2.09

GMiner v2.09 — It is a high-performance miner for AMD and Nvidia GPUs. Closed miner.

  • Mining coins: BEAM, VDS, BTG, YCASH, AE, SWAP, GRIN and many other coins.
  • DevFee: The miner’s developer commission is 2%.
  • Supported OS: Windows, Linux.
  • Bit: 32 bit, 64 bit, x32, x64.
+ fixed low difficulty shares for equihash algorithms (this bug appeared in 2.07 and 2.08)

Please note miners are often marked as malware by antivirus programs. This is not so, they are marked simply because they are cryptocurrency miners. If you do not trust the software, do not use it!

Hashrate (overclocked): Grin coin – CUCKOO

GTX 1070 Ti - 3.2 Gps
GTX 1080 - 3.3 Gps
GTX 1080 Ti - 4.5 Gps
RTX 2070 - 4.3 Gps
RTX 2080 - 5.5 Gps

Supports Algorithms:

  • BeamHash
  • BeamHashI
  • BeamHashII
  • BFC
  • Blake2s
  • Cortex
  • Cryptonightbbc
  • CuckARoo29
  • Cuckaroo29s
  • Cuckarood29
  • Cuckarood29v
  • Cuckaroom29
  • Cuckatoo31
  • Cuckatoo32
  • Cuckoo24
  • Cuckoo29
  • CuckooCycle
  • Eaglesong
  • Equihash-96-5
  • Equihash-144-5
  • Equihash-150-5
  • Equihash-192-7
  • Equihash-210-9
  • Ethash
  • Handshake
  • Grimm
  • Sero
  • ZelHash

Configure GMiner

Customizing .bat Gminer File

  1. miner.exe – this argument indicates which program will be launched. Leave as is. This file should be in the same folder as the batch file
  2. –algo grin29 – indicate the algorithm of the mined coin.
  3. –server – after the –server switch, specify the address of the pool.
  4. –port 13654 – specify the port of the pool
  5. –user rgz – after –user, depending on the pool, either the pool login or the address of the digital wallet is indicated. In our example on f2pool, this is the login
  6. –pass x – specify the pool password. Can be left empty if the pool does not require (x value)

GMiner launch examples

  • For the Grin coin on the f2pool pool, we got the following batch file:
miner.exe --algo grin29 --server --port 13654 --user rgz --pass x
  • For grin and sparkpool pool
miner.exe --algo 150_5 --server --port 2222 --ssl 1 --user 2d1f865b393afa3ead1e0dd0c0307c0cbcdb8412671c86fbd0b21cfe5328b608ca5.rig0
  • For Beam Coin
miner.exe --algo 150_5 --server --port 5000 –ssl 1 --user 2d1f865b393afa3ead1e0dd0c0307c0cbcdb8412671c86fbd0b21cfe5328b608ca5.rgz --ssl 1

Console output

  1. GPU2 Share Accepted 331 ms – It means that the second video card found a ball (solution), it is important to understand that the reward for the miners is for the found balls, and not for anything else.
  2. Temperature: GPU0 42C GPU1 44C GPU2 47C GPU3 42C GPU4 40С GPUS 34C – Temperatures of all video cards.
  3. Rejected Shares: GPU0 0 GPU1 0 GPU2 0 GPU3 0 GPU4 0 GPUS 0 – Means that there are no rejected balls. This is very good, you need to strive for a low percentage of not accepted ball. If they appear, then you need to reduce overclocking, check the connection and ping to the pool, etc.
  4. Power: GPU0 185W 0.03 G/W GPU1 183W 0.03 G/W GPU2 229W 0.03 G/W GPU3 197W 0.03 G/W GPU4 185W 0.03 G/W GPU5 187W 0.03 G/W – Display of power consumption of each card and its efficiency G / Watt
  5. Total Speed: 37.5 G/s Shares Accepted: 18 Rejected: 6 Power: 1166W 3.03 G/W – General indicator of hash rate, accepted ball, rejected, power consumption of the whole farm, as well as efficiency
  6. New Job: 59655248 Difficulty: 4 – Pool sent a new job for video cards
  7. Speed: GPU0 6.1 G/s GPU1 6.2 G/s GPU2 6.3 G/s GPU3 6.3 G/s GPU4 6.3 G/s GPU5 6.3 G/s – The hash rate of each GPU.
  8. Uptime: 0d 00:61:01 Electricity: 6.019kWh – Total farm operating time and total energy spent

Changelog Release Gminer:

+ fixed low difficulty shares for equihash algorithms (this bug appeared in 2.07 and 2.08)

+ fixed "invalid argument" error on RTX 2080 Ti for cuckatoo32 algorithm

+ improved cuckatoo32 performance (up to +20% dependent on GPU and OC mode)

+ improved miner stability on qitmeer

+ improved performance for qitmeer (up to +30%)
+ decreased CPU usage for qitmeer (more than twice)

added KAWPOW(Ravencoin) algorithm
added "--trim" parameter to contol additional trim round count for cuckoo24(qitmeer) algorithm, this options will help reduce cpu load

+ fixed bug with invalid shares for qitmeer

+ added qitmeer (PMEER) support

+ updated BBC algorithm to support latest hardfork
improved ProgPoW support

+ added ProgPoW (Sero) solver for Nvidia GPUs
NOTE: Cuda toolkit should be installed

Recommended New Articles:

Leave a Reply

Your email address will not be published. Required fields are marked *