ATIFlash & AMD VBFlash 2.93: Download BIOS Flashing Tool for AMD GPUs

ATIFlash & AMD VBFlash 2.93: Download BIOS Flashing Tool for AMD GPUs
ATIFlash & AMD VBFlash 2.93: Download BIOS Flashing Tool for AMD GPUs


ATIFlash & AMD VBFlash v2.93 is used to flash the graphics card BIOS. The version released by ATI was called ATIFlash or just WinFlash.

  • It supports all AMD Radeon graphics cards, like RX 5700, RX 5600, RX 5500. You can also flash the BIOS for all AMD Radeon RX Vega, RX 580, RX 480, and all older ATI cards.
  • The VBFlash BIOS update software runs under Windows.

ATIFlash & AMD VBFlash: https://www.techpowerup.com/download/ati-atiflash/

ATIFlash is a small utility for flashing the BIOS of a video card. Works with ATI graphics adapters only.

BIOS flashing may be needed if you want to increase the speed of the video card, change any characteristics (voltage, timing, etc.), or reconfigure the card for more efficient cryptocurrency mining. Attention: flashing the BIOS should be very careful, otherwise the video card may stop working.

So how do I update the BIOS using ATIFlash? First, you need to download the firmware. Next, run the program. On the main window, you will see information about your video card, BIOS version, RAM and physical memory. Next, you need to select a graphics adapter and specify the path to the downloaded firmware. Then press Program, and the update process will begin. After completion, the program will notify you about this. Do not under any circumstances turn off the power to the PC during the update, as this may lead to the loss of the video card’s performance.

With ATIFlash, you can copy the current BIOS firmware. To do this, click Save, and specify the save location. This firmware file can be left as a backup, or you can change the settings using third-party editors.

Program Features

• Flashing BIOS on ATI video cards.
• Support for many models of video cards.
• Ability to save the current BIOS firmware.
• Displaying some information about the system (amount of physical and RAM memory, video memory frequency, etc.) .
• Intuitive interface.
• Support for Windows 7 and higher.

ATIFlash is a utility with which you can easily flash the BIOS of a video card. The program can be downloaded for free.

Instructions ATIFlash

  • System Video Devices – here you must select the video card with which you will work, as well as information about the available video cards.
    • Where is the red arrow – using the save button you save the factory BIOS, or the one that has already been uploaded.
    • Where is the blue arrow – you will choose the firmware that you will upload to the video card.
    • Yellow arrow – after selecting the firmware, you press Program, and the firmware process has started.
ATIFlash & AMD VBFlash 2.93: Download BIOS Flashing Tool for AMD GPUs

Usually, with the help of this program, rx 570, 580, 470, 480 and Vega 56, 64 and many others, up to the r7 series and below, are flashed to increase the hash rate in mining.

Errors and common problems

If your atiflash program gives the error subsystem id mismatch , then most likely you have chosen the wrong firmware, or it has the wrong size (instead of 512kb – 256kb), in this case I usually copy all the data through Polaris BIOS Editor I copy the data into a normal 512kb file, you can ask for more details in the comments.

If atiwinflash does not start , (nothing happens after clicking) then most likely you have windows 10 and an old version of the program, download the latest version 2.8.4 and everything will work.

If the program does not see the video card or adapter not found , check in the device manager if everything is fine with it.

If you have an error cannot find discrete ati video card and does not flash the card, try inserting the video card directly into the PCI e x16 port without a raiser, and also program the cards separately.

The failed to read rom error usually indicates an incorrect firmware file.

It seems that everything, download and use, the latest version 2.8.4 (data from the official site).

Changes:

v2.93

  • Adds support for flashing Navi Radeon RX 5700 Series BIOS

v2.84

  • This version supports BIOS flashing for AMD cards under Windows 10 Build 1803

v2.77

  • Adds Vega support

Recommended New Articles:


If you like to read such articles and want to support the author, then you can subscribe to our telegram channel and recommend us to your friends, this will help a lot to support our project! Telegram: CRYPTO WIKIES | Bitcoin & Altcoins Mining

Be the first to know all the news, read more about cryptocurrencies and mining at CRYPTO-MINING.BLOG.
  • Phoenix BIOS Editor Pro. download and install for Windows

    Phoenix BIOS Editor Pro. download and install for Windows

    The Windows Phoenix BIOS Editor application has a simple interface to modify PhoenixBIOS Rel. 6 and then there is no need to reinstall the BIOS afterwards. It supports unpacking, replacing and repackaging components in the BIOS image and also allows you to change settings and modify the application for the actual BIOS itself.


  • MorePowerTool (AMD GPU): how to download and configure for Windows

    MorePowerTool (AMD GPU): how to download and configure for Windows

    MorePowerTool is a utility designed to help you squeeze as much performance as possible when overclocking your graphics card. MorePowerTool is unofficial overclocking software not authorized by AMD. This means that you use it at your own risk.


  • AMD OverDrive v4.3.1: Download and Configure for Windows

    AMD OverDrive v4.3.1: Download and Configure for Windows

    What is AMD Overdrive used for? Downloading the application to devices running Windows. Benefits of the program. amd overdrive is a utility used to test the hardware of computer devices. It is also used to create optimal settings for AMD processors to perform at their highest level of performance. This program has an accessible and…


Leave a Reply

Your email address will not be published. Required fields are marked *