ID TeamViewer Reset

TeamViewer – A program for remote control. Many TeamViewer users write that their version of TeamViewer after the update began to turn off and set connection limits.

The fact is that you use it too often or connect to different computers. The program suspects that you are using the free version for commercial purposes. Especially to solve such a problem with restrictions, for you, we post the ID of TeamViewer Reset to remove the restriction!

GitHub: Download TeamViewer ID Reset

TeamViewer ID Reset

TeamViewer is a remote control program. Many TeamViewer users report that their version of TeamViewer has started shutting down and limiting connections after updating. This is because you’re using it too frequently or connecting to different computers. The program suspects you’re using the free version for commercial purposes. To address this issue, we’re providing a TeamViewer Reset ID to remove the limitation!

How to reset TeamViewer ID?

After installing TeamViewer and connecting to the network for the first time, the program receives a unique identification number (ID) . This allows remote users to connect to your computer remotely and vice versa. If you use the free version of TeamViewer to connect to different computers (for commercial purposes), there’s a high probability that your remote connections through TeamViewer will be limited to no more than five minutes, after which the connection will be terminated.

If the TeamViewer online service determines that you are using the tool for commercial purposes to connect to multiple client computers, a warning window may appear:

Your trial period has expired.

The commercial use notice in TeamViewer v14 looks like this:

Commercial use detected

This software appears to be used in commercial environments. Please note that the free version is for personal use only.

Your session will end in 5 minutes.

In TeamViewer version 15, the message about limiting the use of your copy of TeamViewer has changed:

We apologize for the interruption.

Your connection has been blocked due to very high levels of activity.

We appreciate your interest, but our software requires a license for professional use. Please click the button to purchase a license to proceed.

The TeamViewer trial expiration message usually appears after a couple of days of using the utility.

In this case, you can try reinstalling TeamViewer, but this won’t help. The only way to remove the restriction is to reset your TeamViewer ID (or purchase a license).

You can see your TeamViewer ID on the main screen when you launch the application.

TeamViewer versions: trial version expiration issue

There are two versions of TeamViewer:

Free version (non-commercial use) – designed for home use and connection to a small number of remote devices;
Paid (commercial) version – the number of connected devices and session duration are unlimited.

If you only use TeamViewer for personal purposes, here’s how to resolve the TeamViewer trial expiration issue.

Make sure you and the users connecting are using the free version of TeamViewer. If one user uses the free version and the other uses the commercial version, the commercial version will consider TeamViewer to be used for commercial purposes.

If you have the commercial version of TeamViewer installed, you should uninstall it and clean the registry and folders of any remaining entries and files. Then install the free version of TeamViewer.

Go to the Add or Remove Programs section, find TeamViewer in the list and select Uninstall ;
After uninstalling the program, press Win+R > %Appdata% > OK. Delete the TeamViewer folder;
Then delete the C:\Program Files\TeamViewer directory;
Safely delete the TeamViewer folder %USERPROFILE%\AppData\Local;
Delete the following registry keys using Registry Editor (regedit.exe): Computer\HKEY_CURRENT_USER\Software\TeamViewer, Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\TeamViewer, and HKLM\SOFTWARE\TeamViewer.
Restart your computer;
Download and install the free version of TeamViewer (click “Free Download: Free for private, non-commercial use” on the TW website);

If that doesn’t work, move on. There’s another, more complex way to extend TeamViewer usage: resetting the TeamViewer ID.

The TeamViewer ID is generated based on several unique attributes of your device:

MAC address of the network card;
VolumeID of the disk partition;
Date the Program Files folder was created.

Accordingly, to change TeamViewer ID, you need to change these 3 values.

Reset or change TeamViewer ID in Windows

To reset your TeamViewer ID on Windows 10, you need to follow a few steps.

First, stop the TeamViewer.exe process and stop the Team Viewer service (net stop Teamviewer). Then, delete the current TeamViewer ID from the registry.

In Windows x86 TeamViewer version [X], open regedit.exe, navigate to the registry key HKLM\SOFTWARE\TeamViewer\ and delete the DWORD value ClientID;
On Windows x64, delete the ClientID value from HKLM\SOFTWARE\Wow6432Node\TeamViewer;
Check if the registry key HKEY_CURRENT_USER\Software\TeamViewer exists and delete it.

Open a PowerShell console with administrator rights and check the creation date of the “C:\Program Files” folder:

Get-Item "C:\Program Files" | select Name, Creation Time

To change the creation date of the Program Files folder , you can use the NirCMD tool (https://www.nirsoft.net/utils/nircmd.html). Download it and run the following command in an elevated command prompt:

nircmdc.exe setfilefoldertime "C:\Program Files" now now

Check if the directory’s CreationTime value has changed.

To change the MAC (physical) address of a network card, you can use special tools, or follow the instructions below to manually edit the MAC address through the registry.

To get the current MAC address of your network card, open a command prompt and run the following command:

ipconfig/all

We are interested in two parameters:

Description (LAN card description) — Intel(R) 82574L Gigabit Network Connection;
Physical address (MAC address) is 00-0C-29-9D-4D-81.

Tip : You can also list your network cards with MAC addresses using a simple one-line PowerShell command:

Get-WmiObject win32_networkadapterconfiguration | select description, macaddress

Then open Registry Editor and navigate to HKLM\SYSTEM\CurrentControlSet\Control\Class\{4d36e972-e325-11ce-bfc1-08002be10318}.

Each network component in this registry key is identified by four digits, starting with 0000, 0001, and so on. You can find the required key by examining it and finding the DriverDesc parameter , which should contain the description (name) of your network card (e.g., Intel(R) 82574L Gigabit Network Connection).

Once the correct network card is found, you need to add or modify a REG_SZ parameter named NetworkAddress . This defines the MAC (hardware) address of the network card. Simply change one digit of the current MAC address, for example, 000C299D4D80.

Tip : If you have multiple physical network adapters on your host (NIC Ethernet adapters or WNIC Wi-Fi adapters), you need to change the MAC addresses for all of them.

So, the network card’s MAC address has been changed. Now you need to change the VolumeID of the system partition. VolumeID (or Volume Serial Number) is a unique identifier for a hard drive volume, which is set during formatting.

Note : In some cases, TeamViewer is associated with a non-system disk volume or even a removable media volume, so it is likely that we need to change the VolumeID of other partitions.

To change VolumeID, use the VolumeID v2.1 console utility. Download and unzip the VolumeId.zip archive .

Check the current VolumeID by opening a command prompt with administrator rights and running the command:

volume

Volume serial number: 5E37-ECE1 .

Change the current value to the new value 5E37-EC11 :

Cd c:\users\root\Downloads\VolumeID

Volumeid.exe c: 5E37-EC11

The OnceVolumeId utility has updated the volume serial number of your system partition, close the command prompt window and restart your computer.

After rebooting, launch the application and you will be assigned a new TeamViewer ID.

How to reset TeamViewer ID on Linux?

If you use TeamViewer on a Linux distribution, follow the instructions below to reset your TeamViewer ID. This method has been tested on Debian 9 and, with some modifications, can be used on any Linux distribution.

Remove Teamviewer with su privileges ;
Delete the /var/lib/dbus/machine-id file if it exists;
Edit the GUID (you can just replace the last character): mc -e id.txt
Change the MAC address of the network card: ifconfig eth0 does not work ifconfig eth0 hw ether New_MAC_HERE ifconfig eth0 up nano /etc/network/interfaces
The correct line is: pre-up ifconfig eth0 hw ether New_MAC_HERE
Reboot the OS;
Install Teamviewer, it should get a new ClientID.

On Linux Mint, you can reset TeamViewer ID as follows:

Remove TeamViewer: sudo dpkg -r teamviewer
Remove the binding file (if it exists): sudo rm /var/lib/dbus/machine-id
Change the MAC address of the network card;
Install the TeamViewer package again: sudo dpkg -i teamviewer_13.2.13582_amd64.deb
If you get an error about missing packages, run the command: sudo apt-get install -f

To change the ClientID on a cloned Linux machine , simply:

Stop the TeamViewer daemon: systemctl stop teamviewerd
Delete TeamViewer settings: rm -r ~/.teamviewer
Delete the folder /opt/teamviewer{TW_VERSION_Here)/config;
Start the TeamViewer daemon.

How to change TeamViewer ID on Mac OS?

To change the TeamViewer ClientID on Mac OS, you can use the TeamViewer-id-changer.py Python script from GitHub. Follow these steps:

Download the script from Git Hub ;
Close TeamViewer (make sure that the TeamViewer process has completely disappeared from the list of processes);
Run the script: sudo ./TeamViewer-id-changer.py
Restart your device.

This script works correctly for TeamViewer 11, 12, 13, 14 and 15.

If reinstalling and resetting TeamViewer ClientID didn’t help, and you’re sure you’re only using TeamViewer for personal use, you can create a device unlock request using the online form (https://www.teamviewer.com/en/reset-management/). Click ” Connect to TeamViewer ” and log in with your TeamViewer credentials to begin the reactivation process.

Fill out the form, specify the specific TeamViewer ID from your device and submit your request.

After some time (3-5 days), TeamViewer support will respond to your request: your device will be unlocked, or the “commercial use” label will remain on your ID. If you use TeamViewer for commercial purposes, purchase a license or try another free remote user and client management product.

Additional tips for resetting your TeamViewer ID

In TeamViewer 15, the developers have significantly changed the way TW IDs are generated. If the above tips don’t work, try one of the following:

Install an older version of TeamViewer (11, 12 or 13), reset it according to the article and try updating the TeamViewer version;
You can create a virtual machine to use Team Viewer. Take a snapshot and install TeamViewer. If your TW ID is blocked, simply revert the virtual machine to the previous snapshot and install TeamViewer from scratch.