TeamRedMiner v0.7.9 (AMD GPU miner) Download and Configure

TeamRedMiner – This is an optimized miner for AMD graphics cards only. Miner ethash, kawpow, nimiq, lyra2z, phi2, lyra2rev3, x16r, x16rv2, x16s, x16rt, MTP, cuckarood29, cuckatoo31, chukwa-512, cryptonight R, cryptonight v8 and a lot of other cryptonight variants.

Changes in v0.7.9

  • Fixes for mixed rig mining on Linux.
  • Added –eth_epoch argument for easier epoch testing.
  • Added –eth_aggr_mode for automatic aggressive ‘B’ mode on Polaris 8GB gpus.
  • Added –watchdog_disable argument.

System requirements:

  • Current and supported driver version
  • For cryptonight and lyra2rev3 algorithms, only amdgpu-pro drivers 18.30 and later are supported on linux. ROCm is not supported.

Card Support (GPUs):

  • RX 5700(XT)/5600(XT)/5500(XT) for kawpow and ethash only.
  • Radeon VII
  • RX Vega 64/56, Vega FE
  • RX 580/570/480/470
  • RX 560/550

Algorithm support and their Dev Fee:

  • Ethash on Polaris GPUs 0.75%
  • Ethash on all other GPUs 1.0%
  • Kawpow 2.0%
  • Nimiq 2.5%
  • Cryptonight R: 2.5%
  • Cryptonight v8 upx2: 2.5%
  • Cryptonight v8 turtle: 2.5%
  • Cryptonight v8 half: 2.5%
  • Cryptonight v8 double: 2.5%
  • Cryptonight v8 rwz: 2.5%
  • Cryptonight v8: 2.5%
  • Cryptonight heavy: 2.5%
  • Cryptonight haven: 2.5%
  • Cryptonight saber: 2.5%
  • Cryptonight conceal: 2.5%
  • Chukwa-512 (Turtlecoin): 2.5%
  • x16r: 2.5%
  • x16rv2: 2.5%
  • x16s: 2.5%
  • x16rt: 2.5%
  • MTP: 2.5%
  • Cuckatoo31: 2.5%
  • Cuckarood29: 2.5%
  • Lyra2rev3: 2.5%
  • Lyra2z: 3%
  • Phi2: 3%

Configuring TeamRedMiner

  1. Download the program
  2. Unzip to any convenient location
  3. Enter your wallets into .bat files
  4. Increase profits by increasing intensity and fine-tuning the program

The miner is configured only through a batch file (file with the .bat extension). You do not need to configure the configuration (there is auto-tuning).

  1. teamredminer.exe – indicates which application will be launched. This file must be in the same folder as the .bat file
  2. -a kawpow – specify the algorithm for mining. For Ravencoin, we specified cnr , while for Zcoin we would specify mtp
  3. after the long construction -o stratum + tcp: // we indicate the pool address
  4. : 4501 – after specifying the pool address, put a colon and write the pool port. The address and port can be found on the pool itself. Usually under Get Started or Help
  5. -u RKAeArXkWLNERjWo5YF3R1xFnYCwKf11sX – specify the wallet that will be used for mining. In our case, this is Ravencoin.
  6. -p x – The p command means a password. The minermore pool (as well as 90% of all pools) does not require a password, so we write x
  7. pause is an optional command. It is only needed so that the program does not immediately close in case of an error, but displays it.

Ready example

teamredminer.exe -a kawpow -o stratum+tcp:// -u RKAeArXkWLNERjWo5YF3R1xFnYCwKf11sX.trmtest -p x

Recommended New Articles:

Leave a Reply

Your email address will not be published. Required fields are marked *