T-Rex Miner 0.26.8: How to set up for mining Ethash, Kawpow, MTP?

Cryptocurrency Miners | Cryptocurrency Mining | Guide | Mining on GPU | Mining on NVIDIA GPU | New Releases | Software

T-Rex Miner 0.26.8: How to set up for mining Ethash, Kawpow, MTP?

Ravencoin is one of the most popular cryptocurrencies on the 2Miners pool. After the hard fork, the coin network got rid of ASIC miners, thanks to which its profitability for owners of video cards has seriously increased. As of January 25, 2021, more than 3 thousand people mine cryptocurrency on 2Miners – and this is a lot. T-Rex allows you to dig this and other coins on Nvidia video cards. Let’s get acquainted with the miner and its features closer.

T-Rex is a miner with support for over 30 algorithms. The program was created for “green” video cards, that is, from Nvidia. Operating systems supported are Windows and Linux. On the project page on the official website, the developers emphasize that they are trying to make T-Rex as convenient and fast as possible.

They are rewarded for their work. The commission is 1 percent, that is, in two hours your equipment will work for developers for a little more than one minute. The exception is the Tensority algorithm. It has a 3% commission.

The commission is normal: lolMiner it is the same 1 percent, so the developers are not very greedy. Although, for example, PhoenixMiner is 0.65 percent.

What can be mined on T-Rex?

T-Rex supports more than thirty algorithms. The most popular among them is now kawpow, on which the Ravencoin network runs after the fork. RVN is the second most popular cryptocurrency on the platform, mined by tens of thousands of people.

Here are all supported algorithms:

                                   autolykos2
                                   blake3
                                   etchash
                                   ethash
                                   firopow
                                   kawpow
                                   mtp
                                   mtp-tcr
                                   multi
                                   octopus
                                   progpow
                                   progpow-veil
                                   progpow-veriblock
                                   progpowz
                                   tensority

T-Rex video card hashrates

We tested Nvidia graphics cards on T-Rex. Here are the results for mining Zcoin XZC on the MTP algorithm:

Nvidia GTX 1060 6gb – 1.6 Mh/s;
Nvidia GTX 1070 8gb – 2.1 Mh/s;
Nvidia GTX 1070Ti 8gb – 2.65 Mh/s;
Nvidia GTX 1080 8gb – 3 Mh/s;
Nvidia GTX 1080Ti 11gb – 3.65 Mh/s;
Nvidia GTX 1660 6 gb – 1.5 Mh/s;
Nvidia GTX 1660Ti 6gb – 2.3 Mh/s;
Nvidia RTX 2060 6gb – 2.1 Mh/s;
Nvidia RTX 2070 8gb – 2.6 Mh/s;
Nvidia RTX 2080 8gb – 3.5 Mh/s;
Nvidia RTX 2080Ti 11gb – 4.3 Mh/s.

And these were the hashrates for mining Ravencoin.

Nvidia GTX 1050 Ti 4gb – 6.5 Mh/s;
Nvidia GTX 1060 3/6gb – 9.5 Mh/s;
Nvidia GTX 1070 8gb – 17 Mh/s;
Nvidia GTX 1070Ti 8gb – 24 Mh/s;
Nvidia GTX 1080 8gb – 27 Mh/s;
Nvidia GTX 1080Ti 11gb – 34 Mh/s;
Nvidia GTX 1660 6 gb – 16 Mh/s;
Nvidia GTX 1660Ti 6gb – 19 Mh/s;
Nvidia RTX 2060 6gb – 21 Mh/s;
Nvidia RTX 2070 8gb – 30 Mh/s;
Nvidia RTX 2080 8gb – 31 Mh/s;
Nvidia RTX 2080Ti 11gb – 38 Mh/s.

By the way, we collect hashrates for other video cards and algorithms in this table. Soon they will be integrated into the mining profitability calculator.

Where to download T-Rex

First, you need to download the software from this link. Make sure you select the correct file for your OS. If you are on Windows, download the .zip file. If you’re on Linux, choose the .tar.gz file. From the names of the files, it is clear that these are program versions for different versions of the CUDA driver for your video card.

GitHub: https://github.com/trexminer/T-Rex/releases

The latest version of the miner at the moment is 0.26.8. In it, the developers focused on fixing bugs and fixed four known issues. You can download T-Rex on the official website. A more convenient option is to download this archive with all programs and files.

How to set up your T-Rex

Once you download the program, you need to select the correct script file depending on the algorithm you want to use to mine the cryptocurrency. Then edit the mining bat file and fill it with the wallet address, worker (farm) name and mining pool URL. After that, save as a .bat file if you are on Windows or bash – .sh if you are on Linux.

Here is an example T Rex Miner .bat file for Binance Pool:

t-rex -a ethash -o stratum+tcp://ethash.poolbinance.com:8888 -u username1 -p x -w worker_name
pause

Launch T Rex Miner

Double click the saved or finished start.bat file to start the miner.

Below are the T-Rex settings for mining Zcoin and Ravencoin on the 2Miners pool. Let’s start with Zcoin XZC.

t-rex.exe -a mtp -o stratum+tcp://xzc.2miners.com:8080 -u YOUR_ADDRESS.RIG_ID -p x
pause

Here are the settings for mining Ravencoin.

t-rex.exe -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u YOUR_ADDRESS.RIG_ID -p x
pause

Don’t forget to replace YOUR_ADDRESS with your wallet address so that the coins go to you.
For example, a8ULhhDgfdSiXJhSZVdhb8EuDc6R3ogsaM.
Also change RIG_ID to be your desired farm name. The opportunity is useful for those who have several rigs. Use no more than 32 Latin characters, numbers, as well as the symbols “-” and “_”.

How to set up LHR unlock

Follow these steps to enable LHR unlock:

Open the batch file (or command line in HiveOs).
Select the device you want to apply LHR unlock to.
Type --lhr-tune 68 or any other supported value into the text box.
Save your changes.
Close the settings window.
Repeat the process for other devices.

Available commands to unlock LHR:

--lhr-algo – specify the second algo to use in LHR unlock dual mining mode.

--lhr-coin – Set coin name for --lhr-algo.

Other mining settings

ETHW+ALPH

t-rex -a ethash --dual-algo blake3 -o stratum+tcp://ethw.2miners.com:2020 -u 0x4121c43205D4244cb6395B2318d711a73fc1a6DE -p x -w rig0 --url2 stratum+tcp://de.alephium.herominers.com:1199 --user2 1qUuxVuXN2Pk4nnYTbL4qihjLWyRkVMQVYQDAajCcuPq --pass2 x

ETC+ALPH

t-rex -a etchash --dual-algo blake3 -o stratum+tcp://etc.2miners.com:1010 -u 0x0924EF9ecBcC1287047cAFd2EAD3A133313eE6A2 -p x -w rig0 --url2 stratum+tcp://de.alephium.herominers.com:1199 --user2 1qUuxVuXN2Pk4nnYTbL4qihjLWyRkVMQVYQDAajCcuPq --pass2 x

ERGO-nanopool

t-rex -a autolykos2 -o stratum+tcp://ergo-eu1.nanopool.org:11111 -u 9gpNWA3LVic14cMmWHmKGZyiGqrxPaSEvGsdyt7jt2DDAWDQyc9.rig0/your@email.org -p x

ERGO-herominers

t-rex -a autolykos2 -o stratum+tcp://de.ergo.herominers.com:1180 -u 9gpNWA3LVic14cMmWHmKGZyiGqrxPaSEvGsdyt7jt2DDAWDQyc9.rig0 -p x

ERGO-woolypooly

t-rex -a autolykos2 -o stratum+tcp://pool.woolypooly.com:3100 -u 9gpNWA3LVic14cMmWHmKGZyiGqrxPaSEvGsdyt7jt2DDAWDQyc9.rig0 -p x

ERGO-2miners

t-rex -a autolykos2 -o stratum+tcp://erg.2miners.com:8888 -u 9gpNWA3LVic14cMmWHmKGZyiGqrxPaSEvGsdyt7jt2DDAWDQyc9.rig0 -p x

ETHW+ZIL-ezil

t-rex -a ethash --coin eth+zil -o stratum+tcp://ethw.2miners.com:2020 -u 0x4121c43205D4244cb6395B2318d711a73fc1a6DE --url2 stratum+tcp://eu.ezil.me:4444 --user2 0x4121c43205D4244cb6395B2318d711a73fc1a6DE.zil1yn92lnkkfsn0s2hlvfdmz6y2yhpqm98vng38s9.WORKER --extra-dag-epoch 0

ETC+ZIL-ezil

t-rex -a etchash --coin etc+zil -o stratum+tcp://eu1-etc.ethermine.org:4444 -u 0x0924EF9ecBcC1287047cAFd2EAD3A133313eE6A2 --url2 stratum+tcp://eu.ezil.me:4444 --user2 0x0924EF9ecBcC1287047cAFd2EAD3A133313eE6A2.zil1yn92lnkkfsn0s2hlvfdmz6y2yhpqm98vng38s9.WORKER --extra-dag-epoch 0

ETC-2miners

t-rex -a etchash -o stratum+tcp://etc.2miners.com:1010 -u 0x0924EF9ecBcC1287047cAFd2EAD3A133313eE6A2 -p x -w rig0

ETC-woolypooly

t-rex -a etchash -o stratum+tcp://pool.woolypooly.com:35000 -u 0x0924EF9ecBcC1287047cAFd2EAD3A133313eE6A2 -p x -w rig0

ETC-ISP-hidden-mode

t-rex -a etchash -o stratum+tcp://eu1-etc.ethermine.org:4444 -u 0x0924EF9ecBcC1287047cAFd2EAD3A133313eE6A2 -p x -w rig0 --no-sni --dns-https-server 1.1.1.1

ETHW-ethproxy

t-rex -a ethash -o stratum+http://127.0.0.1:8080

CFX-woolypooly

t-rex -a octopus -o stratum+tcp://pool.woolypooly.com:3094 -u cfx:aajauymfc0cpd4aj91wmfyd150avfg3fmym9j2xrh8.rig0 -p x

CFX-nanopool

t-rex -a octopus -o stratum+tcp://cfx-eu1.nanopool.org:17777 -u cfx:aajauymfc0cpd4aj91wmfyd150avfg3fmym9j2xrh8.rig0/your@email.org -p x

ALPH-woolypooly

t-rex -a blake3 -o stratum+tcp://pool.woolypooly.com:3106 -u 1qUuxVuXN2Pk4nnYTbL4qihjLWyRkVMQVYQDAajCcuPq -p x -w rig0

ALPH-herominers

t-rex -a blake3 -o stratum+tcp://de.alephium.herominers.com:1199 -u 1qUuxVuXN2Pk4nnYTbL4qihjLWyRkVMQVYQDAajCcuPq -p x -w rig0

RVN-2miners

t-rex -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u RNm4LMBGyfH8ddCGvncQKrMtxEydxwhUJL.rig -p x

RVN-ravenminer

t-rex -a kawpow -o stratum+tcp://stratum.ravenminer.com:3838 -u RNm4LMBGyfH8ddCGvncQKrMtxEydxwhUJL.rig -p x

RVN-woolypooly

t-rex -a kawpow -o stratum+tcp://pool.woolypooly.com:55555 -u RNm4LMBGyfH8ddCGvncQKrMtxEydxwhUJL.rig -p x

SERO-serocash

t-rex -a progpow --coin sero -o stratum+tcp://pool2.sero.cash:8808 -u JCbZnEb8XtWV814QWRpDcDxpQpXZXw4ARneAtwXNYdd3reuo4xQDcuZivopA761QnQyfMermHR9Mpi156F5n7ez9tv75Wt7vWbHXtuyZsQVWLbKNHnZgwcXbR2yZmbw89WT -p x -w rig0

VBK-reb0rn

t-rex -a progpow-veriblock -o stratum+tcp://vbk-reb0rn.ddns.net:8502 -u V5h6udgGe6eL4M9cYGi776WCP75URm -p x -w rig0

VEIL-woolypooly

t-rex -a progpow-veil -o stratum+tcp://pool.woolypooly.com:3098 -u bv1qzftz0vuqa82zy29avylv8sclskweqsrwysgrkg -p x -w rig0

ZANO-luckypool

t-rex -a progpowz -o stratum+tcp://zano.luckypool.io:8877 -u iZ2bZfXdeN626rkyy9YsnfeT1Qq1K6XamE4brWm3tzP5hDUAig4dHmKSqe4yyq5dgbSPjmpLbfidqPyDXAuFY2J9544F95vagSF1Xqq3eCUp -p x -w rig0

FIRO-2miners

t-rex -a firopow -o stratum+tcp://firo.2miners.com:8181 -u aBR3GY8eBKvEwjrVgNgSWZsteJPpFDqm6U.rig0 -p x

FIRO-mintpond

t-rex -a firopow -o stratum+ssl://firo.mintpond.com:3005 -u aBR3GY8eBKvEwjrVgNgSWZsteJPpFDqm6U.rig0 -p x

FIRO-woolypooly

t-rex -a firopow -o stratum+tcp://pool.woolypooly.com:3104 -u aBR3GY8eBKvEwjrVgNgSWZsteJPpFDqm6U.rig0 -p x

To maximize the hash rate, our software uses all available GPU resources, so it is important to check your overclocking settings before mining. Our general recommendation is to start with stock GPU settings (no overclock, default power cap) and then, after making sure it’s stable, slowly increase overclock to find the sweet spot where the miner performs best.

If you like to read such articles and want to support the author, then you can subscribe to our telegram channel and recommend us to your friends, this will help a lot to support our project! Telegram: CRYPTO WIKIES | Bitcoin & Altcoins Mining
Be the first to know all the news, read more about cryptocurrencies and mining at CRYPTO-MINING.BLOG.